Hello,

in my outro I've set a trigger on the start-block to activate the first cam. The start-block is a reuse, so when the car drives over the trigger again, the first camera activates. But I don't want it to activate.

(I had the same situation during the race itself, when the text at the start ("right for demo") was shown when driving over the trigger again. I simply solved it by the condition race time<1.)

Now I have tried every trigger-condition (except speed), but nothing works.

Can anybody help?
Big thanks in advance!
Hans

You could delay the text (right for demo) for 1 or 1.5 secs and add an empty trigger after the text trigger. On the reuse the car would then activate the empty trigger before the text could show up.

Thank you for the answer RachoVolker, but the problem that I have is during the outro. The camera sets in.
I can't put anything on the second block, because it's a reuse too; but a good idea.


---------------------------------------------------------------

Seems that this is a bug that has already been in TM1 and got tranfered to TM2.
TM(1)-Creative:
"KNOWN BUGS!
1) Replay conditions don't work in the Outro/Replay section of the mediatracker.
2) Replay conditions don't work while spectating other drivers on an online server (even in "Follow" mode,which equals the "Ingame" Mediatracker content)."

Nadeo, Nadeo....


I guess I have to change some stuff.
If there should be a solution I'm still interested!

I used the speed condition in some of my tracks to activate the demo and it seems to work...

I tested launch of clip with a condition. I think it is working properly, without any bug.
Errors arise from a misunderstanding of the own conditions Or unclear translation from French


It is necessary to know

1) Condition:
Already triggered 0 (This DOES NOT mean the trigger was running 0x )
This means that the switch number "0" has been launched Already
Thuns writing: Already triggered 14 means that the switch number 14 has been launched already (not the number of hits)


2) switch number
number 14 means the order of the clip in mediatracker (In fact, the number of line)
but Attention ! The first line has number 0 (not 1)
...Thuns clip with number 14 Located on line 15

3) Reset
All values of all switches are reset with restart ( enter or delete )
after the restart all the switches enters into the value ( not already triggered)
But that mean you can NOT reliably detect the condition "not triggered" between CP
You can only be detected reliably value (already triggered YES) because it excludes together the condition respawn

There's still more dependencies but my English is very bad , I hope this helps a little

The bug only occurs in the outro/replay and when spectating.

I see clearly logical error you are doing
Even if you walked through the switch 100 times, always turns MT work , because it has never been activated.
You watch the number of hits, but the switch not !
switch watched if already completed condition . Own transit through the switch not activated it.
Did you set:
switch will actived if,......the same switch was actived already
You not see a paradox in your writing ?
Can not work and watch for one sensor at the same time
You must use next switch for transition detect

edit:
Hmm But I created a test track with outro and mediatracker ignere the conditions in otro . In game working without problem but in outro mediatracker prefered last switch only .

The problems are only in the outro. But thanks for trying olda.

Btw: Here's the source from Mania-Creative (at the end of the page):
http://manuals.mania-creative.com/tm_mediatracker_workflow/index-eng-5

OLDA_X says:
...
Already triggered 0 (This DOES NOT mean the trigger was running 0x )
This means that the switch number "0" has been launched Already
...
2) switch number
number 14 means the order of the clip in mediatracker (In fact, the number of line)
but Attention ! The first line has number 0 (not 1)
...
... you can NOT reliably detect the condition "not triggered" between CP
...

As old as this message is, thanks. Info on all this are so rare, i'd tried stuff with these conditions without luck. At least now i know how it works and how to use the already triggered / not yet triggered properly.